GY-50-1 portable engineering drilling rig

GY-50-1 portable engineering drilling rig 1:Drilling depth:50m 2:Drilling diameter:110mm

 GY-50-1 portable engineering drilling rig  

GY-50-1 portable engineering drilling rig is adopted with hydraulic pressure feeding structure, it can proceed attacking and gyrating drilling, and can be towing removal. The drill is usually used for the engineering geological reconnaissance in road\bridge foundation\dam site\prospecting, or industrial and civil architecture, it can also used in drilling exploratory blast hole. The drill is applicable in plough layer\clay\sand seam\sand and stone seam\sand and boulder bed in Quaternary overburden layer. It can get tube sample in varied depth, and it can used in coring and boring in bedrock.

Technical Figures

Basic  Parameters
Drilling  depth	50m
Drilling  diameter	110mm
Drill  pipe  diameter	42mm
Gross  weight  of  drilling  machine	400kg
Dimension  (length  × width  ×   height)	1660  ×   732  ×   1170    mm
Revolving  Plate
Rotate  speed	54140  300  r/min
Maximum  torque	350N*m
Driving  travel	400mm
Maximum  Cylinder  driving  force	1, 0000N
Maximum  Cylinder  lifting  force	30, 000N
Lifter
Lifting  capacity(single  pipe  low  speed)	10, 000N
Bobbin  line  speed	0.14    0.32    0.68    0.46    1.17    2.53  m/s
Bobbin  diameter	100mm
Rope  diameter	9.3mm
Rope  capacity	18m
Drilling  rig
Type	Tripod
Height	5.6m
Drive  motor
Type	185N
Rated  power	8.8KW
Tare  weight	96kg

GY-50-1 portable engineering drilling rig