GY-600 Coring Drilling Rig

GY-600 Coring Drilling Rig 1:Drilling Depth:600m~700m 2:Spindle Stroke:600mm

GY-600 Coring Drilling Rig

GY-600 is a core drilling rig for middle and shallow hole. It not only can be used for hard alloy drilling, engineering geological reconnaissance, drilling of fluid mineral in superfical layer and natural gas exploitation, but aslo can apply to small diameter drilling of metal or nonmetallic materials and solid deposit with diamond bits. It has been widely used on areas such as road and railway construction, water resources and hydropower and architecture.

Drilling Depth		600m~700m
Swive Head
Spindle Speed (r/min)	Forward	48  87  150  230  327  155  280  485  745  1055
	Reverse	52  170
Maximum Torque		5757N*m
Spindle Stroke		600mm
Maximum Cylinder lifting force		80KN
Maximum Cylinder driving force		60KN
Spindle Through-hole		84mm
Hoist
Bobbin Diameter		230mm
Rope Diameter		15.5mm
Rope Capacity(7 floor)		89m
Lifting Capacity(single pipe)		48KN
Bobbin line speed (the third layer)		0.46  0.83  1.44  2.21  3.15 m/s
Mobile Oil Cylinder Stroke		460mm
Distance of Step Aside The Hole		280mm
Oil Pump		Wheel oil pump
		Diesel Engine	Motor
Type		CB-E25	CB-E40
Displacement		25mL/min	40m/r
Normal Rated Speed		2000 r/min	2000r/min
Normal Pressure		16MPa	16MPa
Power
Type		495K	Y225S-4-B35
Rated Power		36.8KW	37KW
Rated Speed		2000r/min	1480r/min
Dimensions		2850*1050*1900mm
Weight(power not included)		1600kg

GY-600 Coring Drilling Rig